Winner Wednesday Heartfelt Creations Holiday Accordion Album

Holiday Accordion Album

Holiday Accordion Album
Products Used

Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Rock N’ Roll Prills – 12 Pack, ANC851
Deluxe Flower Shaping Kit, HCST1-401
Cut’N’Boss Machine Teresa Collins Edition, 105637
Paper Pack of 10 – Black, HCPP1-438-1
Glue Tip Pins, PIN6
12 x 12 Cardstock Pack of 25 – White, HCPP3-452
Wildwood Cottage Die, HCD1-7127
Stack and Store Daubers-Pack of 30, HCDA2-450
Festive Holly & Cardinals Die, HCD1-7145
Festive Holly Paper Collection, HCDP1-280
Festive Holly & Cardinals Cling Stamp Set, HCPC-3791
Poinsettia & Holly Clusters Die, HCD1-7176
Poinsettia & Holly Clusters Cling Stamp Set, HCPC-3822
3D Poinsettia Shaping Mold, HCFB1-463

Other Products: Stampin Up Chocolate Chip, Real Red, Garden Green Inks

Wildwood Cottage Collection https://youtu.be/g8WLXE8hLRk.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Inspiration for this project comes from Mini Accordion Hinge Book https://youtu.be/2W5wniln328.

Instructions: To see a larger phot of this project, click here. Scoring, Folding and Trimming: Fold 10.5 inches x 10 inches black card stock in half and burnish creases with a bone folder. Die cut ten Wildwood Cottage card bases as per instructions in the video. Cut on fold line of each card base from one inch to 3.5 inches. Cut black cardstock 7.5 inches x 9 inches. Score at one-inch intervals on the long side. Open the accordion folded piece and trim vertically at 5 inches and 2.5 inches cutting across the creases to create three long strips. Connect the strips end to end with glue. Cut and trim ten 3/4 inch by 4.5 inches strips from black cardstock. Cut 38 3 1/2 inches by 3 1/2 inches white cardstock for the inside pages of the mini accordion for photo mats.

Mini Accordion Hinge Book Assembly: Slide one mountain fold of the accordion spine into the slit of one WIldwood Cottage card base from the outside to the inside. Insert one black binding strip into the accordion pleat to secure it to the page. Repeat to insert all pages onto the spine. Adhere the front cover and back cover tabs with dries clear adhesive. Glue the white cardstock photo mats to each page of the album.

Decorate Mini Accordion Hinge Book: Stamp the small poinsettias and holly from the Poinsettia & Holly Clusters Stamp Set five times, color with chocolate chip ink, die cut and color with Stampin Up Chocolate Chip, Real Red, and Garden Green ink using sponge daubers. Place the flowers in the molding tray and run through the die cutting machine for shaping. Finish shaping with flower shaping tools and glue together. Insert prills with glue into the center of each flower. Set aside to dry. Die cut a front and back cover from Festive Holly paper with the Wildwood Cottage die. Glue front and back cover into place with dries clear glue. Stamp 38 images from the Festive Holly & Cardinals Stamp set with chocolate chip ink, die cut and color with Stampin Up Chocolate Chip, Real Red, and Garden Green ink using sponge daubers. Glue one holly bunch to each page of the album.

Adhere the flowers to the front cover as shown.

Created by: Pamela Korte

Winner Wednesday Heartfelt Creations Flourishing Gift Box

Flourishing Gift Box

Flourishing Gift Box
Products Used

Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Cut’N’Boss Machine Teresa Collins Edition, 105637
Glue Tip Pins, PIN6
12 x 12 Cardstock Pack of 25 – White, HCPP3-452
Stack and Store Daubers-Pack of 30, HCDA2-450
Banners Of Love Cling Stamp Set, HCPC-3803
Heartfelt Love Sentiments Cling Stamp Set, HCPC-3804
Heartfelt Love Paper Collection, HCDP1-284
Gift Of Love Box Die, HCD1-7163
Banners Of Love Die, HCD1-7160

Other Products: Paper trimmer, scoring board, bone folder, ribbon, foam tape, Stampin up Lemon Lime ink, Stampin Up Melon Mambo ink, Stampin Up Early Expresso ink

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view a larger photo of this project, see here. Die cut four Heartfelt Creations box sides with white card stock and the Gift of Love box die. Stamp, color and die cut four of the flower clusters from the Heartfelt Creations Banner of Love stamp set and die sets. Color the flower clusters with Stampin Up red rose, Lemon Lime and Powder Puff Pink ink.

Assemble box using dries clear glue to attach the sides and bottom. Fold the top down. Die cut four pieces of designer paper from the Heartfelt Creations Heartfelt Love collection. Glue these pieces to the top portion of each side of the box. Put a very light layer of glue on each side panel of the box and sprinkle the crystal clear glitter on each die panel. Attach the colored flower clusters with foam tape to each side of the box. Attach ribbon to the very top of the box. A tealight can be placed inside to illuminate the gift box.

Fabulous Friday Heartfelt Creations I Know You Journal

I Know You

I Know You
Products Used

Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Cut’N’Boss Machine Teresa Collins Edition, 105637
Paper Pack of 10 – Kraft, HCPP1-438-3
Glue Tip Pins, PIN6
Pocket and Flipfold Inserts F-Kraft, HCFP2-440-3
Woodsy Wonderland Paper Collection, HCDP1-273
12 x 12 Cardstock Pack of 25 – White, HCPP3-452
Stack and Store Daubers-Pack of 30, HCDA2-450
Heartfelt Love Paper Collection, HCDP1-284
Sweetheart Borders Die, HCD1-7161
Words to Live By Journal Pages, HCJB1-5002
3 Ring Journal Binder-White, HCJB2-5004

Other Products: Paper trimmer, scoring board, ribbon, Bible scripture, Bible alphabet

Instructions: See here to peek at the inside. Cut two pieces of Heartfelt Love designer paper and two pieces of Woodsy Wonderland designer paper 8 inches by 8 3/4 inches. Cut one piece of Heartfelt Love designer paper at 1 1/4 inches by 8 3/4 inches. Die cut the large Heartfelt Creations Sweetheart Border and the large outline of the border on Heartfelt Love designer paper. Cut out of the Heartfelt Love paper Jeremiah 29:11 verse. Use dries clear glue to cover the front outside, spine and back of the journal with Heartfelt Love designer paper. Using dries clear glue, cover the front inside and back inside of the journal with Heartfelt Creations Woodsy Wonderland paper. On the front outside of the journal glue the Jeremiah scripture, and die cut border pieces to form a pocket. Adhere with dries clear glue.

Cut 26 pieces of kraft card stock at 3 3/4 inches by 5 1/4 inches and 38 pieces at 2 3/4 inches by 3 1/4 inches.

On pinterest one can locate several Bible alphabets and scripture cards for printing and personal use. I located a scripture alphabet and 38 scriptures that are very meaningful. Each alphabet design was glued to one of the 3 3/4 inches by 5 1/4 inches kraft card stock pieces of paper and glued to a page in the journal using the Words to Live By Journal Pages. The scripture cards that were located were glued to the 2 3/4 inches by 3 1/4 inches kraft card stock. The first word of each scripture identified the location in the journal. For example if the scripture started with a B word it was glued to the B scripture page of the alphabet. Tie ribbon on the side of the notebook.

Created by: Pamela Korte

Winner Wednesday Heartfelt Creations Birthday Card Gift Set

Birthday Card Gift Set

Birthday Card Gift Set
Products Used

Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Deluxe Flower Shaping Kit, HCST1-401
Cut’N’Boss Machine Teresa Collins Edition, 105637
Minnie Pearls Prills, ANC803
Tu Tu Pink Prills, ANC811
Hot Mama Prills, ANC821
Glue Tip Pins, PIN6
Classic Rose Cling Stamp Set, HCPC-3752
Classic Rose Die, HCD1-7110
12 x 12 Cardstock Pack of 25 – White, HCPP3-452
Stack and Store Daubers-Pack of 30, HCDA2-450
Classic Wedding Roses Die, HCD1-7142
Classic Wedding Roses Cling Stamp Set, HCPC-3788
Banners Of Love Cling Stamp Set, HCPC-3803
Heartfelt Love Paper Collection, HCDP1-284
Eyelet Hearts Die, HCD1-7162
Sweetheart Borders Die, HCD1-7161
Banners Of Love Die, HCD1-7160

Other Products: Paper trimmer, scoring board, bone folder, matte board, ribbon, foam tape, Stampin up Melon Mambo cardstock, Stampin up Lemon Lime ink, Stampin Up Melon Mambo ink, Stampin Up Early Expresso ink

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view more photos of this project, see here. Cut one piece of black card stock 3 1/2 inches by 6 1/2 inches. Score 1 inch from the left and right edge on the 3 1/2 inches side and 3/4 inches on the 6 1/2 inches left edge side. Cut two pieces of matte board for covers at 4 3/4 inches by 6 1/4 inches. Place glue on the 1 inch border of the matte board. Place the glued area of the board onto the spine cover black card stock, aligning the corner of the board with the intersecting score lines. Repeat for the second matte board. Fold the top and bottom flaps of the 3 1/2 inches by 6 1/2 inches black card stock piece around the matte boards and glue into place. Cut two pieces of black cardstock 6 1/4 inches x 6 1/4 inches. Flip the matte boards and spine piece over. Place glue on the exposed areas of the matte boards and attach the 6 1/4 inches by 6 1/4 inches black cardstock pieces to the glued areas. Use a pair of scissors to remove the paper from each corner at a 45-degree angle. Glue the long flaps of the black card stock around the boards. Tuck in the excess paper that extends beyond the tip of each corner and glue the short flaps of the black card stock in place. Cut a piece of black card stock 3 1/2 inches by 4 1/4 inches for the inside spine. Glue this piece of black card stock into place on the inside of the card box. Use a bone folder to burnish the two spine covers together and to shape a slightly curved spine.

Cut two pieces of Heartfelt Creations, Heartfelt Love paper 6 1/4 inches by 4 1/5 inches and glue these pieces to the front and back outside covers. Cut one piece of designer paper 1 inch by 4 1/2 inches and one piece 1 1/4 inches by 4 1/2 inches. Glue these pieces to the outside and inside spine of the card box. Stamp in Stampin Up Early Expresso ink the Heartfelt Creations small heart from the Classic Wedding Roses Cling Stamp set. Color the wreath flowers with Stampin Up Melon Mambo ink and the leaves with Stampin Up lemon lime ink. Die cut the wreath with the Heartfelt Creations Classic Wedding Roses die. Stamp, color and die cut six sets of Heartfelt Creations Classic Roses. Stamp with Stampin Up Early Expresso ink and color with Stampin Up Melon Mambo ink. Shape the flowers in to small roses and rose buds. Attach the wreath and the roses to the center of the front of the card box. Die cut with Stampin Up Melon Mambo card stock two sets of each of the Sweetheart Borders Die. Attach the border pieces to the top and bottom of the front of the card box.

Score two pieces of 9 3/4 inches x 12 inches black card stock. Score on the 9 3/4 inches side at 1 1/2 inches, 2 inches, 2 3/4 inches and 8 1/4 inches. Score on the 12 inches side at 3 inches, 3 1/4 inches, 7 3/4 inches and 8 1/4 inches. Cut away from the 3 inches score line to the 12 inch line the outside scored areas on each piece of black card stock. Fold long the score lines and glue the side flaps around the back. Place glue on the back of the pockets formed and attach to the inside covers.

Cut two pieces of Heartfelt Creations Heartfelt Love paper at 5 1/2 inches by 2 3/4 inches and four pieces of paper at 5 1/2 inches by 3 1/2 inches. Attach these pieces with glue to the front top, front bottom, and bottom front of the card box inside pockets. Take the Stampin Up Melon Mambo Heartfelt Creations Sweetheart border pieces cut earlier and glue to the top front pocket panels. Cut from the Heartfelt Creations Heartfelt Love paper the Just For You and Let’s Celebrate pieces and glue to the top of the die cut borders.

Cut four 8 1/2 inches by 5 1/2 inches white card stock pieces to form the cards. Score at 4 1/4 inches on the 8 1/2 inches side. Cut 4 pieces of white cardstock 4 inches by 5 1/4 inches and foam tape these pieces to the front of each card base. Cut four pieces of Heartfelt Creations Heartfelt Love paper at 5 inches by 3 3/4 inches and two pieces at 3 1/4 inches by 4 1/4 inches. Arrange the paper on each card as illustrated and glue into place. Use prills with glue to cover the middle of each flower on the cards. Tie ribbon as a border on two of the four cards.

Created by: Pamela Korte

Winner Wednesday Heartfelt Creations Triple Heart Easel Card

Triple Heart Easel Card

Triple Heart Easel Card
Products Used

Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Deluxe Flower Shaping Kit, HCST1-401
Cut’N’Boss Machine Teresa Collins Edition, 105637
Minnie Pearls Prills, ANC803
Hot Mama Prills, ANC821
Glue Tip Pins, PIN6
12 x 12 Cardstock Pack of 25 – White, HCPP3-452
Stack and Store Daubers-Pack of 30, HCDA2-450
Banners Of Love Cling Stamp Set, HCPC-3803
Heartfelt Love Paper Collection, HCDP1-284
Eyelet Hearts Die, HCD1-7162
Banners Of Love Die, HCD1-7160

Other Products: Paper trimmer, scoring board, Hot Off The Press Template heart triple easel card, Stampin Up Early Espresso ink, Stampin Up Powder Pink ink, Stampin Up Garden Green ink, Stampin Up Rose Red ink, foam tape

For more tips on creating with the Heartfelt Love collection, watch the tutorial at https://youtu.be/AePSIkkwaCE.

Instructions: To view more photos of the inside see here. I used a triple easel heart card template http://www.paperwishes.com/products/4107434 to form the base for this interactive heart triple easel card. When the first layer is lifted another layer is revealed. Trace and cut the small, medium and large card base from white cardstock.

Die cut a total of ten descending size hearts from Heartfelt Creations Heartfelt Love paper collection with the Heartfelt Creations Eyelet Hearts die.

Stamp, die cut and color the flower arrangement and just for you banner from the Heartfelt Creations Banners of Love stamp and die sets in Early Espresso ink onto white cardstock. Color with Powder Pink, Garden Green, and Rose Bud inks. Sprinkle Minnie Pearl prills and Hot Mama Prills into the middle of each stamped flower.

Cut from the Heartfelt Creations paper collection in the follow sizes and quantities: 1- 2 inches x 2 inches, 2- 1 inch x 2 inches, 1- 3 1/2 inches x 3 3/4 inches, 2- 2 inches x 3 1/2 inches, 1- 4 inches x 5 1/4 inches, and 2- 2 3/4 inches x 4 inches.

Once all the prep work is completed, the card is assembled. Place glue on the large heart card base front section just below the score line. Attach the three largest heart cluster with the Just for You stamped image arranged in the smallest of the three-heart cluster, aligning with the point on the lower edge. Repeat this same procedure for the medium and small heart clusters and stamped images. Open the large, medium and small card bases and glue the corresponding sized cut papers to the sections with dries clear adhesive. After adding all the necessary hearts and paper to the individual card bases, open the large card base and glue the medium base centered on the large base aligning the bottom edge. Open the large and medium card bases. Glue the small card base centered on the medium base, aligning the bottom edges. Open the small heart card base and foam tape the smallest heart cut centered 1/4 inch from the bottom edge.

To display the card, open the largest heart and tuck it behind the medium heart card base so it stands up upright. Open the medium heart card base and tuck it behind the small heart card base, then open the small heart card base and tuck it behind the smallest foam raised single heart in front.

Winner Wednesday Travel Tags Gift Bag

Travel Tags Gift Bag

Products Used

Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Cut Mat Create 1A Die, HCD2-749
Cut Mat Create 1B Die, HCD2-750
Cut Mat Create 2A Die, HCD2-751
Cut Mat Create 2B Die, HCD2-752
Cut’N’Boss Machine Teresa Collins Edition, 105637
Paper Pack of 10 – Kraft, HCPP1-438-3
Glue Tip Pins, PIN6
Stack and Store Daubers-Pack of 30, HCDA2-450
Young At Heart Die, HCD1-7158
Simply Classic Die, HCD1-7159
Young At Heart Cling Stamp Set, HCPC-3800
Simply Classic Cling Stamp Set, HCPC-3801
Good Times Sentiments Cling Stamp Set, HCPC-3802
Young At Heart Paper Collection, HCDP1-283
Travel Tags Gift Bag

Other Products: Paper trimmer, scoring board, Gift Bag Punch Board, foam dimensionals, bag handles recycled from shopping bag, ribbon, twine, pearls

For more tips on creating with the Young at Heart collection, watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Watch the instructional video to correctly use the gift bag punch board at https://youtu.be/VaqO1QgGT44.

Instructions: Use Gift Bag Punch Board with a piece of kraft cardstock 8 inches by 12 inches. Align left edge of 12 inch side of paper on start line of the gift bag punch board and punch. Score horizontal and large line on baord. Align the large line on bag to start line on the punch board and punch score horizontal and side line on cardstock. Align this second line to that start line on punch board and punch. Score the horizontal and large line on cardstock. Align 3rd line to start line on the punch board and punch. Score side and horizontal line. Fold on score lines and glue bag together. Add handles. Cut two pieces of Young at Heart designer paper at 3 1/2 inches by 5 1/2 inches and two pieces of Young at Heart designer paper at 1 3/4 inches by 5 1/2 inches. Glue papers in place on bag. Cut out Road Trip and Journey border strips from the paper. Fussy cut Classic, You are not old, you’re a classic from the paper. Die cut the red car from the paper. Place dimensional form dimensionals under the three cut pieces from the paper and place on the front panel of the bag. Glue the bag handles to the inside front and back panel. Tie ribbon to one of the bag handles.

Tags: Cut six tags using the Cut Mat Create 3 1/2 inches by 5 1/2 inches die from kraft paper. Die cut 12 panels of designer paper using the Cut Mat Create dies 3 1/2 inches by 5 1/2 inches. Glue the designer paper panels to the front and the back of the six kraft paper tags.

Tag # 1: Die cut a picture using the Cut Mat Create dies at 3 1/2 inches x 2 1/2 inches. Cut out embrace life tag image. Cut out fancy border and glue to left side of picture. Arrange and glue in place on the front of the tag. On the back of the tag leave with designer paper. Punch a hole in the top of the tag and tie ribbon and twine in place.

Tag # 2: Cut out Come fly with me image, congratulations tag, and let the good times roll tag. Decorate the let the good times roll tag with a pearl. Congratulations tag place ribbon and twine in the top of the tag. Cut out board with cars at 2 inches by 3 /12 inches. Glue on three sides to form a pocket for the tags. On the back of the tag leave with designer paper. Punch a hole in the top of the tag and tie ribbon and twine in place.

Tag # 3: Die cut a picture using the Cut Mat Create dies at 3 1/2 inches x 2 1/2 inches. Cut out Happy Birthday board and Come fly with me airplane stamp image. Arrange and glue in place on the front of the tag. On the back of the tag leave with designer paper. Punch a hole in the top of the tag and tie ribbon and twine in place.

Tag # 4: Cut out welcome congratulations panel from the paper and glue the bottom and left side to the front of the tag to form a pocket. Cut out three tag images from the paper and place in pocket.On the back of the tag leave with designer paper. Punch a hole in the top of the tag and tie ribbon and twine in place.

Tag # 5: Die cut a picture using the Cut Mat Create dies at 3 1/2 inches x 2 1/2 inches. Cut out forever young border and forever young stamp. Arrange and glue in place on the front of the tag. On the back of the tag leave with designer paper. Punch a hole in the top of the tag and tie ribbon and twine in place.

Tag # 6: Cut out car panel from the paper and glue the bottom and left side to the front of the tag to form a pocket. Cut out two tag images from the paper and place in pocket. On the back of the tag leave with designer paper. Punch a hole in the top of the tag and tie ribbon and twine in place.

Created by: Pamela Korte

Winner Wednesday Heartfelt Creations Adventure of a Lifetime Flipfold Album

Adventure of a Lifetime Flipfold Album

Adventure of a Lifetime Flipfold Album

Products Used

Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Cut Mat Create 1A Die, HCD2-749
Cut Mat Create 1B Die, HCD2-750
Cut Mat Create 2A Die, HCD2-751
Cut Mat Create 2B Die, HCD2-752
Cut’N’Boss Machine Teresa Collins Edition, 105637
Glue Tip Pins, PIN6
12 x 12 Cardstock Pack of 25 – White, HCPP3-452
Stack and Store Daubers-Pack of 30, HCDA2-450
Young At Heart Die, HCD1-7158
Simply Classic Die, HCD1-7159
Good Times Sentiments Cling Stamp Set, HCPC-3802
Young At Heart Paper Collection, HCDP1-283
Card Shadow Box Set-Kraft, HCBC1-456-3
Other Products: Paper trimmer, scoring board, chipboard, foam dimensionals

For more tips on creating with this collection watch the tutorial at https://youtu.be/kmqAVM6ibfM.

Instructions: To view more images of this project see here. Easel Base: Cut four chip board pieces two 5 inches x 6 3/4 inches and two 2 1/2 inches x 5 inches. Cut and score white cardstock one piece 5 inches by 12 inches and score on 12 inch side at 6 3/4 inches and 9 1/4 inches. Cut and score white cardstock 5 inches by 5 inches and score at 2 1/2 inches. Cut three pieces of white cardstock at 5 inches by 6 3/4 inches. These pieces of chipboard and white cardstock form the 3D frame for the pop up flip fold base. The frame of the pop up base is made and stands up like a flip up easel card. Take the 5 inches by 12 inches white cardstock piece and glue one of the 5 inches x 6 3/4 inches chipboard to the top of the 5 inches by 6 3/4 inches section. Place one of the 2 1/2 by 5 inches chipboard pieces just to the right of the 6 3/4 inches score line and the second chipboard piece to the right of the 9 1/4 inches score line on the white cardstock. Place corresponding size white cardstock pieces on the other side of the chipboard. Take the second 5 inches by 6 3/4 inches chipboard and place white cardstock on both sides of it. Taking the 5 x 12 inches piece of chipboard covered with white cardstock and the 5 inches by 6 3/4 inches chipboard covered with white cardstock glue the pieces together to form the easel base. See picture for location of chipboard pieces.

Square shadow box flip fold page: Using the Cut Create Mat dies cut frame piece from the designer paper and cut a corresponding size picture for the shadow box frame. Glue the frame front and picture in place. Cut four pieces of designer paper 1/2 inch by 5 inches. Glue these pieces to the outside four edges of the frame. Cut one piece of white cardstock at 3 inches by 5 inches and score at 1/2 inch on 3 inch side. Fold on score line and glue this piece of white cardstock to the back of the shadow frame and the top of the white cardstock on the 5 inches by 6 3/4 inches flip frame made in previous step. This will allow the shadow box to flip up as the first page of the flip fold easel card. Cut a piece of white cardstock 5 inches by 6 inches. Score at 1/2 inch and 5 1/2 inches on 6 inch side of cardstock. Fold on score lines and glue to the back of the shadow box frame to form a pocket. Cut a piece of 4 1/2 inches and 4 1/2 inches white cardstock. Cut two 4 inches by 4 inches pictures and glue to either side of the cardstock. Make a circle tab to glue to top of the white cardstock to allow this piece to easily moved in and out of the pocket! Cut a piece of 5 inches by 5 inches designer paper to cover the back of the shadow box frame and pocket. Cut out a picture 4 1/2 inches by 4 1/2 inches to place on top of the designer paper on the back of the shadow box frame.

Cover the base of the flip fold album with designer papers measuring four 5 inches by 6 3/4 inches and three 2 1/2 inches by 5 inches. For the top bottom section of the flip fold album cut out adventure of a lifetime border and glue in place as illustrated in picture and cut out a 4 inches by 4 inches picture and glue in place. Second and third pages of flip fold album contains four 4 inches by 4 inches pictures on a piece of white cardstock measuring 4 1/2 inches by 9 inches that is scored at 4 1/2 inches on the 9 inch side. Cut a piece of white cardstock 1 inch by 4 1/2 inches to form the flip fold. Score at 1/2 inch to form flip fold.Glue piece to the back section of the second page and to the top of flip fold easel to form these pages of the flip fold waterfall album. See picture for placement of these pages.

Hold easel album up: Die cut airplane from the designer paper and die cut one airplane from white cardstock. Place foam dimensionals between designer airplane and white cardstock airplane to pop up airplane. Stamp journey and die cut journey sentiment out. Die cut journey sentiment shape from white cardstock and place foam dimensionals between stamped journey sentiment and cardstock to pop up journey banner.

Created by: Pamela Korte

Previous Older Entries