Team Tuesday Heartfelt Creations One Sheet Wonder Cards and Card Bag

Heartfelt Creations Products Used:

Backyard Blossoms Paper Collection
HCDP1-290

Directions

1.Cut one sheet of Heartfelt Creations 12 inches by 12 inches into one 6 3/4 inches by 12 inches for the bag, six 1 inch by 5 1/2 inches pieces and six 3/4 inches by 5 1/2 inches..
2. The 6-3/4” x 12” piece is for the bag. Score on the 12 inch side at 4 1/2 inches, 5 3/4 inches, 10 1/4 inches and 11 1/2 inches. Score on the 6 3/4 inches side at 1 inch and 5 1/2 inches. Crease at all score lines. Cut to first intersecting score line at 4 1/2 inches, 5 3/4 inches 10 1/4 inches and 11/12 inches on the 1 1/4 inches score line side to form the bottom of the bag.Decide which pattern you want on the outside and
glue the top 1 inch “border” flap down with glue . Place glue along the 1/2” edge on the side and
assemble bag along that edge. Fold the bottom flaps up and use glue to finish the bottom of the bag. glue two pieces of 8 inch ribbon on the top inside front and back side along top edge to make your handles. Your bag is now complete and ready to fill with cards.
3. Cut three pieces of 8-1/2” x 11” white card stock in half to make the base for six cards (fold each piece in 1/2 to make an
A-2 card). Glue the 1” strips of Heartfelt Creations paper along the left side of each card and the 3/4” strip along the right side. Cut six pieces of 3-1/8” x 5-1/2” white cardstock. Punch a border along one side of each of these pieces. Cut six pieces of 2-1/2” x
5-1/2” card stock in a color that coordinates with the Heartfelt Creations paper.Die cut the leaves die six times in white card stock and
punch at the top of each card stock and oval piece, stamp a greeting and embellish with ribbon.
4. Place the cards in the bag (along with some envelopes) and you’re done!

Team Tuesday Heartfelt Creations Card Tote and Cards

Heartfelt Creations Products Used:

Camelia Carnation Creative Essentials
HCCE1-631

3D Floral Basics Shaping Mold
HCFB1-464

Arianna Lace Die
HCD1-747

Special Birthday Sentiments Cling Stamp Set
HCPC-3843

Album Tags and Accents Die
HCD1-7202

3D Leafy Accents Shaping Mold
HCFB1-467

Leafy Accents Cling Stamp Set
HCPC-3835

Leafy Accents Die
HCD1-7193

This card tote, cards and decorative envelopes are made with two pieces of 12 x 12 paper from the Camelia Carnation collection!

Card Instructions

  1. Cut 6 pieces of red card stock 4 1/4 inches by 5 1/2 inches. Adhere to the card bases.
  2. Cut 6 pieces of white card stock 2 1/4 inches by 5 1/4 inches. Cut 6 pieces of red Camelia Carnation paper 2 inches by 5 inches and adhere to the white card stock. Adhere these pieces to the card front.
  3. Die cut 6 Arianna Lace flowers from white card stock.
  4. Die cut 6 white card stock album tags. Stamp the album tags with happy birthday greetings from the Special Birthday Sentiments Stamp set.
  5. Attach the Arianna Lace flowers and album birthday tags to the card fronts.
  6. Cut 6 1/2 inch by 5 1/2 inches strips of the Camelia Carnation paper and attach to the right edge of the inside of each card.
  7. Cut 6 2 inches by 5 1/2 inches pieces of Camelia Carnation paper and adhere to the envelope as a decoration.
  8. Adhere pearls to the center of each Arianna Lace flower and to each end of the album tags.

Card Tote Instructions

  1. Score a 8 1/2 inches by 11 inches piece of red card stock on the 8 1/2 inches side 1 1/4 inches from each side.
  2. Score 4 1/2 inches from each side on the 11 inches side of the paper.
  3. Cut the short score lines and fold and adhere to form the card tote box.
  4. Cut two pieces of Camelia Carnation paper 4 1/2 inches by 6 inches and adhere to the front and back side of the card tote. Cut two pieces of 1 1/2 inches by 4 1/2 inches of Camelia Carnation paper to adhere to either side of the card tote.
  5. Cut two pieces of red ribbon 12 inches long. Attach the ribbon to form handles on the inside of the front and back of the card tote.
  6. Cut two pieces of red ribbon for the front and back top of the card tote. Adhere the ribbon in place. Add decorative pearls to the ribbon.

Carnations for the front of the card tote.

  1. Stamp, die cut, color, mold and form three medium size carnations with the Camelia Carnation stamp and die sets. Mold with the Basic Flowers mold.
  2. Stamp, die cut, color, mold and form one leafy accent with the Leafy Accents stamp and die sets. Mold with the Leafy accents mold.
  3. Attach the leafy accents and three carnations to the front of the tote.

Heartfelt Creations Alumni Blog Flipfold A and C Mini Album

Hello! Welcome to the August 2018 Heartfelt Creations Alumni Team Blog Hop.
Image may contain: text

You should be coming here from

The hop begins at 8AM EST on (August 31, 2018) and runs until 11:59PM EST (September 3, 2018)

I work with a very motivated and fun group of ladies every week making a variety of paper crafting projects. Recently some of them mentioned to me that they were not sure what to do with the albums and flipfold inserts they had purchased. I decided to review The Beginner’s Workshop for Elegant Flipfold Albums: How to Add Flipfold Inserts that Emma Lou from Heartfelt Creations presented as an online class  that is available here: https://www.heartfeltcreations.us/shop/?tracking=5add3e34e7161  The online class provides easy step by steps  through the steps of adding interactive Flipfold & Pocket Inserts A, B, C, D, E, and F to your albums, along with how to add magnet closures. The online class takes the mystery out of these inserts and how easy it is to add Flipfold inserts to your Album, which all differ in design and come pre-measured and pre-scored making assembly quick and stress free, all while allowing varying combinations and designs making your album as unique as you are.

I created three sample albums to use as teaching tools with the ladies . This album showcases Flipfold and Pocket Inserts A and C with retiring Beary Fun Retreat Paper Collection.

. What do you think?

 

Supplies

Beary Fun Retreat Paper Collection HCDP1-282

3D Flipfold Album – Black HCFA1-430

Pocket and Flipfold Inserts A – Black HCFP1-433-1

Pocket and Flipfold Inserts C – Black HCFP1-435-1

Be sure to visit all the blogs in the hop and leave a lovely comment as one lucky comment will be randomly selected from a mystery blog to receive a $25 gift certificate to shop with Heartfelt Creations. To claim the prize, the winner will need to contact socialmedia@heartfeltcreations.us with the words August Alumni Blog Hop Winner.

 

 

 

 

Team Tuesday Gift Basket

This is a die cut gift basket that can be used throughout the fall season.

Team Tuesday Dog Love Pop Up Card

This group of dogs has teamed up to send a simple message of love today! This pop up box card was made with a stamp set and die set from Pink and Main and colored with alcohol markers. Have a great day!

Team Tuesday Stampin Up Share What You Love One Sheet Wonder Cards and Purse

This project included 14 cards from one sheet of 12 x 12 designer series paper and a purse from one sheet of 12 x 12 designer paper! Two sheets of 12 x 12 paper and 14  4 1/4 inches x 5 1/2 inches white card bases and colored card stock cut 1/4 inch larger than the designer series paper on the cards!

I used this one sheet wonder template to make the cards with some variations from the original posting layouts for the cards that I located at: https://www.craftsy.com/paper-crafts/article/one-sheet-wonder/

 

One Sheet Wonder Layout

Layout Samples Final

For the purse that holds the 14 cards and envelopes I started with a 12 inches x 12 inches designer series paper and adapted the tutorial for a  folded handbag found here: http://stampwithsilvey.blogspot.com.au/2012/08/mini-bag-tutorial.html

Using a scoring board and scoring tool measure 3 1/4 inches from the left edge and score down and repeat on the opposite edge. Turn the paper 90 degrees and measure for the left edge 5 inches and score down and repeat on the opposite edge. Valley fold on all the horizontal and vertical lines. Fold up to create the handbag gift bag! Added ribbon for handles.

Team Tuesday Chest of Drawers

This was a fun project to make where the drawers can be filled with any small goodies such as candy or jewelry. Cut four pieces of card stock 6 inches by 7 3/8 inches and score at 1 3/8 inches on all four sides. Cut the four tabs to allow folding of the tabs inwards and glue to create four individual drawers. Cut decorative paper and mat the front of each drawer as desired. I used very heavy card stock that was already decorative and did not add additional decorative paper.

Cut two pieces of card stock 4 1/4 inches x 6 1/4 inches and score on both short sides and one long side at 3/4 inches. Cut and glue the tabs to create two shelves.

Cut two pieces of card stock 3 3/8 inches x 9 1/2 inches and score at 4 3/4 inches and 8 7/8 inches. Glue the two pieces together to create a frame.

Turn one shelf over and drop it onto a drawer and repeat with the second drawer. Place one drawer with a shelf in the bottom of the frame. Place the second drawer with a frame on top of the first drawer. Place the third drawer in place. Once you are satisfied with how the drawers and shelves fit in the frame, remove them from the frame. Starting with bottom drawer and shelf, glue the sides of the shelf to the inside of the frame. Repeat for the second drawer and fit the third drawer in place. You can add decorative brads to the front of each drawer as desired to ease in opening and closing the drawers!

Take the last drawer and punch a decorative border into each side to form legs for your chest of drawers. Glue the drawer upside down on the outside of the frame to  form the “stand” for the chest of drawers.

Cut a 1 inch x 12 inches piece of card stock to create a strip for a handle. Glue the handle to each side of the drawers to allow for easy transport. What do you think of the chest of drawers?

Previous Older Entries