Winner Wednesday Holiday Tea Dispenser

Holiday Tea Dispenser

Holiday Tea Dispenser
Products Used

Funnel Tray, 31510
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Shell White Microfine Transparent Glitter, 741
Spring Bling Prills – 12 Pack, ANC850
Spellbinders Tool N’ One, 359848
Deluxe Flower Shaping Kit, HCST1-401
Cut’N’Boss Machine Teresa Collins Edition, 105637
Sunrise Lily Cling Stamp Set, HCPC-3720
Sunrise Lily Die, HCD1-787
Glue Tip Pins, PIN6
8.5 x 11 Cardstock Pack of 25 – White, HCPP2-451
Stack and Store Daubers Bundle-5 Packs of 6, HCDA1-449-bundle
Festive Holly Paper Collection, HCDP1-280
Festive Holiday Die, HCD1-7146

Other Products: Paper trimmer, string of pearls, Stampin Up Ink Early Expresso, Daffodil Delight and Wild Wasabi, tea time metal charms, ribbon, flax string

Watch this tutorial to see how to shape the lilies Flower shaping 101 https://youtu.be/Pnu_xqlx060

Instructions: Dispenser: Score a 6″ x 12″ piece of cardstock at 1″ parallel to the long edge, score at 3 1/16″, 5 3/4″, 8 13/16″, 11 1/2″ parallel to the short edge. Score 3/4″ above the 1″ score line in the second segment only. Cut out the 1 3/4 x 2 3/4″ piece from the bottom of the second segment and 1/2 x 1″ corner piece. Cut between the remaining 1″ flaps. Crease all the score lines in valley folds. Place glue on the back side of the ½ inch flap on the right end. Fold the cardstock into a square tube and attach the flap to the inside surface of the left end. Cut Festive Holly paper 2 pieces 2 7/8 x 4 7/8″ one piece at 2 5/8 x 4 1/8″ and one piece 2 ½ x 4 7/8″. Decorate the side panels. Before you start adhering the side panels, make sure to lay out all pieces to see where each piece fits. Attach the side panels to the box sides. Die cut three medallions with white card stock and apply clear glitter to the medallions. Attach to the three side panels without an opening with glue. Attach string of pearls to the side panel edges of tea dispenser.

Base of Box: Cut a piece of cardstock 2 7/8 x 3 3/8″. Place glue on the outer surfaces of the lower flaps. Fold them to create the bottom of the dispenser. Cover the cardstock with Festive Holly paper. Center the dispenser bottom on the card stock and press in place.

Lid: Cut a piece of cardstock 4 1/4″ by 4 5/8″ inches and score at 3/4″ inch on all four sides. Cut and taper the corners. Wrap the tabs to the inside and attach them to the inner side panels to create the lid. Cut a piece of Festive Holly paper 2 1/2″ x 2 7/8″ and glue to the top of the lid. Cut out one of the borders from the Festive Holly paper and glue to the side of the lid. Attach string of pearls to the top edge of the lid. Attach the tea time metal charms with a flax string.

Flowers: Stamp three lilies with Stampin’ Up Early Espresso ink. Color the lilies with Daffodil Delight and Wild Wasabi ink. Die cut the lilies and shape using the Deluxe flower shaping kit. Apply pink prills with glue to the center of the individual lilies.  Attach completed flowers to the side panel and top of the tea dispenser. Under the lid lily attach May Art ribbon under the lily.

Created by: Pamela Korte

Winner Wednesday Heartfelt Creations Holiday Covered Wagon

Holiday Covered Wagon

Holiday Covered Wagon
Products Used

Funnel Tray, 31510
Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Shell White Microfine Transparent Glitter, 741
Spellbinders Tool N’ One, 359848
Deluxe Flower Shaping Kit, HCST1-401
Cut’N’Boss Machine Teresa Collins Edition, 105637
Border Essentials Die, HCD1-783
Botanic Window Die, HCD1-7100
Glue Tip Pins, PIN6
Wildwood Cottage Accents Cling Stamp Set, HCPC-3772
8.5 x 11 Cardstock Pack of 25 – White, HCPP2-451
Wildwood Cottage Accents Die, HCD1-7128
Stack and Store Daubers Bundle-5 Packs of 6, HCDA1-449-bundle
Festive Holly & Cardinals Die, HCD1-7145
Festive Holly Paper Collection, HCDP1-280
Festive Holly & Cardinals Cling Stamp Set, HCPC-3791
Festive Holiday Die, HCD1-7146
Holly Berry Jingle Die, HCD1-7147
Festive Holiday Cling Stamp Set, HCPC-3792
Holly Berry Jingle Cling Stamp Set, HCPC-3793

Other Products: Paper trimmer, string of pearls, bells, brown chipboard wheels and Stampin Up ink Early Espresso, Chameleon Pens Cool Gray, Grass Green, Bark, Crimson Red, Warm Sunset

Watch this tutorial for tips on using the Festive Holly collection https://youtu.be/PufXslTDQhs.

Covered Wagon: To  see a close up diagram click here and here. Cut a piece of cardstock 11 inches by 12 inches for covered wagon. With 12 inches edge of cardstock at the top of the scoring board, score at 4 inches and 8 inches. With 11 inches edge of cardstock at the top of the scoring board, score at 4 inches and 7 inches. Refer to covered wagon diagram for scoring, cutting and gluing placement. Fold covered wagon into a box. Secure tabs with glue. Cut festive holly decorative paper to cover covered wagon. Cut two festive holly decorative pieces of paper at  3 7/8 inches by 3 7/8 inches and two pieces of decorative paper at 2 7/8 inches by 3 7/8 inches. Cover covered wagon. Stamp in black ink onto white cardstock, die cut and color two sleigh bells, one wagon wheel, one lantern, eight sets of a variety of holly berry and holly berry with cardinals with Heartfelt Creations Festive Holly and Cardinals, Festive Holiday and Holly Berry Jingle stamp and die sets. Attach completed die cuts to covered wagon. Refer to picture for placement.

Covered Wagon Cover: Cut a piece of cardstock 5 1/8 inches by 6 1/8 inches for covered wagon cover. Score cardstock piece at 1 inch on all four sides. Refer to covered wagon cover diagram for scoring, cutting and gluing placement. Cut a piece of white card stock and decorative paper 2 7/8 inches x 2 7/8 inches. Cut and glue the white cardstock and decorative paper diagonally in half. Glue these pieces to the short ends of the top of the wagon. Cut a 3 7/8 inches by 8 6/8 inches festive holly decorative paper for top of covered wagon cover. Score at 4 3/8 inches to form peak of roof. Die cut Heartfelt Creations border essential from festive holly decorative paper and attach to both long sides of wagon cover. Attach roof of the wagon to the top.

Covered Wagon Base: Cut a piece of white cardstock 6 inches by 10 inches. Score on all four sides at ½ inch and 1 inch. Fold this piece into an upside box with open side down. Cover with Festive Holly paper 4 inches by 6 inches. Cut a piece of Festive Holly decorative paper 4 inches by 6 inches and score every half inch to make the stairs.

Add 5 bells to each of the sleigh bells images and wagon wheel. Attach 4 wheels to covered wagon. Refer to picture for placement. Add holly leaves and bells to the middle of the wheels. Add holly image to the two sides of the covered wagon. Add the wagon wheel and the lantern to the back side of the lantern. Die cut two Festive Holiday medallions with Festive Holly die, glue together and attach to the top of the roof of the covered wagon. Die cut the background and the frame of the Botanic Window die with Festive Holly paper and attach with a festive holly spring to the front of the covered wagon. Stamp with Early Espresso ink and die cut three sets of fences and one fence gate with Wildwood Cottage Accents Cling Stamp and Die sets. Attach to the front of the covered wagon with a sprig of holly. Attached the scored staircase to the underneath side of the lower front of the wagon per picture. Add string of pearls to the roof and covered wagon edges. Attach sleigh bells to either side of the front of the covered wagon.

For more information visit my webpage kraftykorte.wordpress.com

Created by: Pamela Korte

Winner Wednesday Heartfelt Creations Classic Wedding Mini Album

Train Mini Album

Train Mini Album
Products Used

Designer Dries Clear Adhesive, 159723
Metal Tip for Adhesive Bottles, 352854
Cut’N’Boss Machine Teresa Collins Edition, 105637
Glue Tip Pins, PIN6
8.5 x 11 Cardstock Pack of 25 – White, HCPP2-451
Classic Wedding Paper Collection, HCDP1-279

Other products: Paper trimmer, score board, ruler, scissors

Instructions: This a very easy and fun way to make a super interactive mini album that fits in the Classic Wedding train caboose that was highlighted a few weeks ago on this blog. The inspiration for this project came from https://youtu.be/lvsq_ERugUk My Sister Scrapper. Instead of making a mini album that is rectangle as described in the video I altered the mini album to a 3 ½ inches by 3 ½ inches mini album that is put together the same way.

For the pages: You will need to cut six pieces of white cardstock 7 inches by 7 inches square. Score both ways at 3 ½ inches. Cut one of the four score lines to the middle intersection mark on each of the six pages. Cut six pieces of white cardstock 3 inches by 4 ½ inches Score on the 4 ½ inches side at ½ inch from each end and with the 3 inches side across the top score at 1 ½ inches. Cut a small notch at the ½ inch and 1 ½ inch intersection for ease in folding the pockets on each of the six set of pages. Fold on the score lines of the 7 inches by 7 inches white cardstock pieces with the open side on the page on the top and bottom with the folded page with the opening side on right side and bottom forming the pocket. Attached glue to the ½ inch borders of the 3 inches by 4 ½ inches pieces and glue in place to form the pockets. Refer to pictures for details. Attach the pockets with glue. Cut six pieces of white cardstock 3 inches by 3 inches and 12 pieces of white cardstock 2 inches by 3 inches. Cut 30 pieces of Classic Wedding decorative paper 3 inches by 3 inches and 12 pieces of Classic Wedding decorative paper 1 ¼ inches by 4 ¼ inches for the pockets. Attach decorative papers to white cardstock with glue.

For the hidden hinge: Cut a piece of white cardstock 3 inches by 12 inches and score every half inch across the 12 inch side. Glue six sets of hinges starting from the middle and working your way outward with one open hinge that lays flat between each raised page hinge. You will have 1 inch and 1 ½ inches of scored lines left over at each end.

For the cover: Cut a piece of white cardstock that measures 3 ¾ inches by 10 inches. On the 10 inches side of the paper score 3 ¾ inches from each end. I used a ½ inch gusset in between the pages and the hidden hinge system described in the video. Glue the hidden hinge piece in to the binding of the mini album and the extra to the inside front and back cover. Cover the cover with four pieces of 3 ½ inches by 3 ½ inches Classic Wedding Paper and 1 piece 2 ½ inches by 3 ¾ inches paper for the outside of the cover.

Created by: Pamela Korte