13 Feb 2019
by pkortern
in 3 d project, Dies, Heartfelt Creations, Tutorial, Winner Wednesday
Heartfelt Creations Products
Instructions
This clutch purse can hold gift cards and other small gifts and includes a small note card to write a short note and fits inside the clutch purse!
Directions
- Cut a piece of card stock 5 3/4 inches x 11 inches.that coordinates with the Backyard Blossoms paper. Score on the long side at 3 inches, 4 inches 7 inches and 8 inches.
- Cut two pieces of card stock at 3 inches square and score every 1/2 inch to make an accordion fold piece to form the sides of the clutch purse.
- Cut two pieces of Backyard Blossoms paper at 7/8 inch x 5 5/8 inches and 3 pieces of Backyard Blossoms paper at 2 7/8 inches x 5 5/8 inches. Attach paper to each panel of the clutch purse. Attach the accordion pieces to form the sides of the purse.
- Cut a piece of card stock 3/4 inches by 11 inches and a piece of Backyard Blossoms paper 1/2 inch by 11 inches. Adhere these pieces together to form the handle and attach to the bag.
- Stamp, die cut, color and mold five sets of Floral Fashionista flowers.
- Die cut in white card stock one elegant pocket accent and adhere to the front of the clutch purse. Adhere the flowers onto the white card stock die cut piece.
- The note card is made with a 3 inches x 6 inches piece of card stock scored at 3 inches. Two pieces of Backyard Blossoms paper 2 7/8 inches x 2 7/8 inches are attached to the front and inside of the card.
This is my original design for a clutch purse. I have been experimenting with purse dies and different patterns. What do you think?
12 Feb 2019
by pkortern
in 3 d project, Card, Dies, Heartfelt Creations, Team Tuesday, Tutorial
Heartfelt Creations Products Used:
Directions
1.Cut one sheet of Heartfelt Creations 12 inches by 12 inches into one 6 3/4 inches by 12 inches for the bag, six 1 inch by 5 1/2 inches pieces and six 3/4 inches by 5 1/2 inches..
2. The 6-3/4” x 12” piece is for the bag. Score on the 12 inch side at 4 1/2 inches, 5 3/4 inches, 10 1/4 inches and 11 1/2 inches. Score on the 6 3/4 inches side at 1 inch and 5 1/2 inches. Crease at all score lines. Cut to first intersecting score line at 4 1/2 inches, 5 3/4 inches 10 1/4 inches and 11/12 inches on the 1 1/4 inches score line side to form the bottom of the bag.Decide which pattern you want on the outside and
glue the top 1 inch “border” flap down with glue . Place glue along the 1/2” edge on the side and
assemble bag along that edge. Fold the bottom flaps up and use glue to finish the bottom of the bag. glue two pieces of 8 inch ribbon on the top inside front and back side along top edge to make your handles. Your bag is now complete and ready to fill with cards.
3. Cut three pieces of 8-1/2” x 11” white card stock in half to make the base for six cards (fold each piece in 1/2 to make an
A-2 card). Glue the 1” strips of Heartfelt Creations paper along the left side of each card and the 3/4” strip along the right side. Cut six pieces of 3-1/8” x 5-1/2” white cardstock. Punch a border along one side of each of these pieces. Cut six pieces of 2-1/2” x
5-1/2” card stock in a color that coordinates with the Heartfelt Creations paper.Die cut the leaves die six times in white card stock and
punch at the top of each card stock and oval piece, stamp a greeting and embellish with ribbon.
4. Place the cards in the bag (along with some envelopes) and you’re done!
08 Feb 2019
by pkortern
in 3 d project, Card, Dies, Fabulous Friday, Heartfelt Creations, Tutorial
I originally came across pictures for a pull up card in a British paper crafting magazine with metric measurements. A second name for this type of interactive card is called a lantern card. I sat down with my metric ruler one night and made this pull up card. The next day I came across a video through Pinterest. The measurements on the video were different than the one I made. The video is excellent in showing very easily how to make this WOW factor card and can be located at https://youtu.be/5gMeR8z9PEM! I made my card to fold flat and fit into a 6 inches x 6 inches envelope for mailing with extra postage because it is a square card.
Heartfelt Creations Products Used
Directions
- Cut four pieces of 2 inches x 12inches white card stock for the concertina strips. Score along the 12 inches side at 2 inches, 4 inches, 6 inches, 8 inches & 10 inches. Alternate mountain folds and valley folds to make the four concertina strips
- Cut twenty pieces of Singing in the Rain paper 1 3/4 inches by 1 3/4 inches to layer on top of the concertina strip. Attach the paper in place.
- Die cut eight Album Tags and Accents pieces, eight Arianna Lace pieces and four Cut Mate Create 2 A pieces in white card stock. Attach these pieces on top of the paper on the concertina strips.
- Cut one piece of 6 inches by 6 inches white card stock for the base of the card. Cut two pieces of 5 3/4 inches by 5 3/4 inches paper to cover the top and bottom of the base white card stock. The strips MUST be center of each side of the card base. Attach the four concertina strips to the white card stock base with the reserve side of the undecorated scored section at the end of the strip and then attach the top and bottom paper. Cut out the saying ” You are the Flower in my Garden and glue to the decorative picture on the top of the base of the card.
- Cut two pieces of 1 inch by 6 inches paper to hold the card together. Glue in the middle to form a cross. Punch a 1 inch and 1 1/4 inch circle from card stock and paper. Attach to the center of the white cross. Punch a hole in the middle to add a loop of 12 inches of ribbon and thread through the cross. Secure the ribbon on the back of the cross piece.
- Attach the reverse of the scored section at the top of each strip to the ends of the cross to finish. Add “special Wishes” sentiment.
07 Feb 2019
by pkortern
in 3 d project, Boxes, Card, Dies, Heartfelt Creations, Tutorial, Tutorial Thursday
Heartfelt Creations Products Used
Stationery Box
- Cut two pieces of card stock 5 1/2 inches by 8 1/2 inches. Score on 8 1/2 inches side at 7 inches.
- Cut two pieces of card stock 3 inches by 8 1/2 inches. Score on 8 1/2 inches side at 1 1/4 inches, 1 3/4 inches, 6 3/4 inches and 7 1/4 inches.
- Cut two pieces of card stock 3/4 inch by 8 1/2 inches.
- Cut two pieces of Singing in the Rain paper at 5 1/4 inches by 6 3/4 inches, two pieces 2 3/4 inches by 4 3/4 inches, and two pieces 1/2 inch by 8 1/2 inches.
- Die cut from white card stock on petite pocket accent for the front top of the stationery box.
- Attach the two 5 1/4 inches by 6 3/4 inches paper to the two pieces of card stock 5 1/2 inches by 8 1/2 inches that form the front and back panel of the stationery box. Attach the die cut white card stock piece to the front top panel on top of the paper.
- Adhere the two scored ends of the 5 1/2 inches by 8 1/2 inches pieces one onto the other. The two scored ends together form the bottom of the box.
- Take the two pieces of card stock that are 3/4 inch by 8 1/2 inches and attach the 1/2 inch by 8 1/2 inches pieces to the card stock. These pieces form the handle of the box. Glue in place to the top front and back panels inside of the box.
- Take the two 3 inches by 8 1/2 inches card stock and adhere the paper 2 3/4 inches by 4 3/4 inches to the center section of each piece. Make mountain folds on all score lines to form the pockets for inside of the stationery box. Adhere these pieces inside at the bottom front and back panels.
- Stamp, die cut, color, and mold four flowers for the front of the stationery box. Attach completed flowers to the right bottom and center of the front panel of the box. Place pearls in the center of each flower and on the petite pocket accent die piece. Attach ribbon bow to center top of panel below center flower and tie ribbon bow to hold handles together.
Cards
- Cut six pieces of colored card stock 5 1/2 inches by 7 1/8 inches and score on the 7 1/8 inches side at 4 1/4 inches.
- Cut six pieces of white card stock 4 inches by 5 1/4 inches and six pieces 2 5/8 inches by 5 1/4 inches. Adhere white card stock pieces to the front small panel and inside right panel.
- Punch six scallop oval card stock pieces and six white oval card stock pieces. Stamp with the sentiment hello from the Furry Tail Frolic stamp set with black ink. Adhere white card stock hello ovals to the card stock oval pieces.
- Stamp, die cut, and color a total of 12 flowers sprigs from Rain Boots and Blossoms stamp and die cut sets.
- Cut six pieces of Singing in the the Rain paper 2 3/8 inches by 5 inches and adhere to the front panel on top of the white card stock.
- Arrange two flower sprigs on each card at the middle of the front panel with the hello sentiment oval below the sprigs and adhere in place.
Envelopes
Each envelope is decorated with a 2 inches by 5 3/4 inches piece of the Singing in the Rain paper.
This set makes a lovely gift!
29 Aug 2018
by pkortern
in 3 d project, Dies, Winner Wednesday
The purse for the enclosed shaker cards is made with Our Daily Bread die. The shaker cards are made with Lawn Fawn dies and stamp sets. What do you think?
24 Aug 2018
by pkortern
in 3 d project, Card, Dies, Fabulous Friday
A friend of mine always likes to sent Halloween cards to her nieces. I designed this card using a Stampin up die, Close to my Heart letter B and a Fun Stampers Journey card carrier die and embossing folder! Think I covered everyone company with the card too! What do you think of the card carrier and cards?
17 Aug 2018
by pkortern
in Card, Dies, Fabulous Friday
Age does not diminish the extreme disappointment of having a scoop of ice cream fall from the cone.
Jim Fiebig
29 Jun 2018
by pkortern
in 3 d project, Dies, Fabulous Friday, Heartfelt Creations, Tutorial
Hello! Welcome to the June 2018 Heartfelt Creations Alumni Team Blog Hop.
You should be coming here from
The hop begins at 8AM EST on June 29, 2018) and runs until 11:59PM EST (July 2, 2018)
On the Heartfelt Creations website there is an online class for the Classic Petunia Flowerpot with Emma Lou. It was a wonderful class to take online! After watching the class, I made my own flowerpot with blue and red petunias. I encourage everyone to sign up for this awesome class with Emma Lou. She provides easy step by steps as she guides you through the steps of creating classic florals grouped together in a bouquet and added to the most adorable flower pot. You will learn her top tips and secrets to creating dimensional classic florals and bouquets that you will absolutely love!
Bonus: Learning these techniques, will allow you to create classic bouquets and florals for your favorite paper crafted projects that will have your friends and family “ooohing and aaahhing” and asking if you really made this:)
Heartfelt Creations Supplies:
HCPC-3785 Small Classic Petunia Cling Stamp Set
HCD1-7139 Small Classic Petunia Die
HCPC-3786 Large Classic Petunia Cling Stamp Set
HCD1-7140 Large Classic Petunia Die
TSMP900 Memento Tuxedo Black Ink
Basic Supplies : 3″ mini terra cotta flower pot, styrofoam, green floral wire, fake fern or mossery to cover the styrofoam, hot glue gun, water mister, wire trimmer, scissors, paper trimmer, die cutting machine, red dye ink, blue dye ink
Be sure to visit all the blogs in the hop and leave a lovely comment as one lucky comment will be randomly selected from a mystery blog to receive a $25 gift certificate to shop with Heartfelt Creations. To claim the prize, the winner will need to contact socialmedia@heartfeltcreations.us with the words May Alumni Blog Hop Winner.
Previous Older Entries
kraftykorte 